How to paint a grill easily

Can a grill be painted one might ask? Yes you can! Refreshing the surface of your grill is easy with a new coat of paint. The best way to apply grill paint is Maston Heat-Resistant Spray Paint which withstands high temperatures and quickly gives your grill a clean, like-new appearance. With minimal effort, an old grill can once again become a stylish part of your outdoor kitchen.

A short guide to painting a grill with spray paint easily

Painting a grill is not difficult! Watch this short 36-second video, or read the instructions below. You’ll also find the products needed for painting your grill at the end of the article!

Required tools and materials for painting a grill

• Degreaser spray (Maston Degreaser)
• Maston Heat-Resistant Spray Paint, 600 °C
• Sandpaper P320–P400
• Masking tape
• Protective paper or plastic sheeting
• Protective gear (mask, gloves, and safety goggles)

Steps for successfully painting a grill

1. Preparation

• Choose a well-ventilated area for painting.
• Carefully cover all areas that should not be painted.
• Make sure paint mist does not spread into the surroundings.

2. Remove or protect parts

• Use a screwdriver or suitable tool to remove grates, fasteners, and other detachable parts.
• Alternatively, cover them carefully with masking tape and protective plastic.
• Label removed parts to make reassembly easier.
• If desired, you can also paint the fasteners and handles to match the grill.

3. Clean and sand the surface

• Thoroughly clean all surfaces to remove grease, dust, and dirt.
• Lightly sand the surface if needed using P320–P400 grit sandpaper to ensure better adhesion.
• Finally, wipe the surfaces with a degreaser such as Maston Degreaser.

4. Painting

• Test the paint on a hidden area first.
• Shake the spray can thoroughly before use.
• Apply 1–3 thin coats of Maston Heat-Resistant Spray Paint.
• If applying multiple coats, heat the surface between layers and allow the paint to dry before the next coat. Check drying times on the can.

5. Drying

• The paint is touch-dry in about 30 minutes.
• After application, allow the surface to dry for approximately 30 minutes at +20 °C.
• Remove protective coverings after drying.
• The paint reaches its final durability after being heated to around +200 °C for approximately 60 minutes.

6. Putting the grill into use

• Once the paint is fully dry and the grill has been heated once, it is ready for use.
• Remove any remaining protective materials and clean the work area.

Tips for the best results

• Always work in a well-ventilated space.
• Test the spray paint on a small, inconspicuous area first to ensure the desired color and finish.
• Work calmly and allow each coat to dry properly.
• A spray handle can make painting easier, improve control, and help achieve a more even finish.

By following these instructions, you can easily and affordably refresh the look of your grill. Spray painting is a quick and effective way to restore an old and worn grill to a clean, attractive condition.

Maston products outside of Finland: please check your local retailers. Retailers are found all around Europe!