Rubberpaint - Spray paints - Maston

SPRAY PAINTS

Maston spray paints and lacquers are suitable for hobbyists and professionals alike. We offer suitable products for both spraying and brush application.

With our easy-to-use spray paints youll create luxurious and impressive surfaces easily and quickly. Most of our spray paints are equipped with a patented adjustable Blue Spray jet nozzle. It is possible to adjust the nozzle for both vertical and horizontal painting. The nozzle is easy to use and provides an even painting result.

Rubberpaint

RUBBERcomp® is a multi-purpose, air drying specialty rubber coating. It can be easily applied by dipping, brushing, or spraying. It protects coated items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. RUBBERcomp remains flexible and stretchy over time, and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -30°C to 90°C. Available sizes: spray 400ml, cans: 250ml, 1L, 3L and 450ml thinner. See more: www.rubbercomp.com

Limit search

  • Spray RUBBER Shield Transparent gloss 400ml

    Spray RUBBER Shield Transparent gloss 400ml

    RUBBERshield® is a revolutionary scratch and petrol resistant coating. It is designed to finish surfaces which are coated first with RUBBERcomp® rubber coating. RUBBERshield® laminates and bonds efficiently with the previous rubber layer. RUBBERshield® remains flexible and stretchy over time, and will not crack or become brittle in extreme weather conditions. The hardness, scratch resistance and the solvent resistance of RUBBERshield® coating can be compared to original automotive 2-component clear coats. Tested and proven in temperatures from -30°C to +90°C. INSTRUCTIONS FOR USE: Coat first the surface with RUBBERcomp® synthetic rubber and follow the instructions of use. Spray several, at least one and a half cross layers (=3 layers) to get enough film thickness. Let the RUBBERcomp® surface dry until completely dry. Applying RUBBERshield® Spray one covering layer horizontally first. Let dry and level for a couple of minutes. Thereafter spray another vertical layer. Finally spray a third wet layer horizontally. DRYING Drying time (at 20°C, 50% relative air humidity): Dust-dry: after 30 minutes Dry to touch: after 60 minutes Petrol and scratch resistance: 2 days Completely hard 7 days Applying in cooler temperatures or under different air humidity conditions may affect drying times, finish quality, and spray performance.

    Read more
  • Spray RUBBER Shield Transparent matt 400ml

    Spray RUBBER Shield Transparent matt 400ml

    RUBBERshield® is a revolutionary scratch and petrol resistant coating. It is designed to finish surfaces which are coated first with RUBBERcomp® rubber coating. RUBBERshield® laminates and bonds efficiently with the previous rubber layer. RUBBERshield® remains flexible and stretchy over time, and will not crack or become brittle in extreme weather conditions. The hardness, scratch resistance and the solvent resistance of RUBBERshield® coating can be compared to original automotive 2-component clear coats. Tested and proven in temperatures from -30°C to +90°C. INSTRUCTIONS FOR USE: Coat first the surface with RUBBERcomp® synthetic rubber and follow the instructions of use. Spray several, at least one and a half cross layers (=3 layers) to get enough film thickness. Let the RUBBERcomp® surface dry until completely dry. Applying RUBBERshield® Spray one covering layer horizontally first. Let dry and level for a couple of minutes. Thereafter spray another vertical layer. Finally spray a third wet layer horizontally. DRYING Drying time (at 20°C, 50% relative air humidity): Dust-dry: after 30 minutes Dry to touch: after 60 minutes Petrol and scratch resistance: 2 days Completely hard 7 days Applying in cooler temperatures or under different air humidity conditions may affect drying times, finish quality, and spray performance.

    Read more
  • Spray RUBBERcomp Black 400ml

    Spray RUBBERcomp Black 400ml

    RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -30°C to +90°C. Easy to peel off. Around four paint layers needed for adequate film thickness. Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary. [VIDEO RUBBERcomp](https://www.youtube.com/watch?v=-_20bFIeu6Q)

    Read more
  • Spray RUBBERcomp Black matt 400ml

    Spray RUBBERcomp Black matt 400ml

    RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -30°C to +90°C. Easy to peel off. Around four paint layers needed for adequate film thickness. Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary. [VIDEO RUBBERcomp](https://www.youtube.com/watch?v=-_20bFIeu6Q)

    Read more
  • Spray RUBBERcomp Blue 400ml

    Spray RUBBERcomp Blue 400ml

    RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -30°C to +90°C. Easy to peel off. Around four paint layers needed for adequate film thickness. Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary. [VIDEO RUBBERcomp](https://www.youtube.com/watch?v=-_20bFIeu6Q)

    Read more
  • Spray RUBBERcomp Camo beige matt 400ml

    Spray RUBBERcomp Camo beige matt 400ml

    RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -30°C to +90°C. Easy to peel off. Around four paint layers needed for adequate film thickness. Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary. [VIDEO RUBBERcomp](https://www.youtube.com/watch?v=-_20bFIeu6Q)

    Read more
  • Spray RUBBERcomp Camo brown matt 400ml

    Spray RUBBERcomp Camo brown matt 400ml

    RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -30°C to +90°C. Easy to peel off. Around four paint layers needed for adequate film thickness. Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary. [VIDEO RUBBERcomp](https://www.youtube.com/watch?v=-_20bFIeu6Q)

    Read more
  • Spray RUBBERcomp Camo green matt 400ml

    Spray RUBBERcomp Camo green matt 400ml

    RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -30°C to +90°C. Easy to peel off. Around four paint layers needed for adequate film thickness. Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary. [VIDEO RUBBERcomp](https://www.youtube.com/watch?v=-_20bFIeu6Q)

    Read more
  • Spray RUBBERcomp Gun metal grey 400ml

    Spray RUBBERcomp Gun metal grey 400ml

    RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -30°C to +90°C. Easy to peel off. Around four paint layers needed for adequate film thickness. Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary. [VIDEO RUBBERcomp](https://www.youtube.com/watch?v=-_20bFIeu6Q)

    Read more
  • Spray RUBBERcomp Neon green 400ml

    Spray RUBBERcomp Neon green 400ml

    RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -30°C to +90°C. Easy to peel off. Around four paint layers needed for adequate film thickness. Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary. [VIDEO RUBBERcomp](https://www.youtube.com/watch?v=-_20bFIeu6Q)

    Read more