Primer - Liquid paints - Maston
Painted bicycle Painted bicycle

LIQUID PAINTS

Maston liquid paints are suitable for both the brush and spray gun application.

The product line-up includes both general and special paints. Maston liquid paints can be used in combination with the Maston spray paints. Please select the same type of the product from both lines, for example 400 °C heat resistant paint and spraypaint 400 °C.

For large areas, we recommend liquid paints, for smaller and more complex objects spray paints are more convenient in use.

Primer

Primer meant for both indoor and outdoor applications. A prior coat of paint is recommended to ensure good adhesion. The primer is suited for wood, metal, stone, glass and most plastic surfaces. Before priming check the suitability of the primer on a small surface area. Very good coverage ability.

Limit search

  • Paint AutoRust Grey 250ml

    Paint AutoRust Grey 250ml

    MASTON AutoRust Primer is an effective anti-corrosive primer. Can be applied directly onto rust. In the case of strong rust damage we recommend applying Maston RUST STOP anti-corrosive agent at first. Instructions: Remove loose rust with a wire brush or sandpaper. Clean the surface from oil, grease, salt and dirt. If necessary, thin with Maston Xylene, max. 10%. Drying time at +20 ° C: Dust-dry in 30 min, touch dry in 1 h, overcoating is possible after 12h. Coverage: 8-10m2 / l. Heat resistance: +125 ° C.

    Read more
  • Paint H2O! Grey Primer 1l

    Paint H2O! Grey Primer 1l

    Maston H2O! PRIMER - an especially quick-drying water-soluble primer for both indoor and outdoor applications. Well suited for both timber and metal surfaces. For optimum results: observe the following instructions to obtain a resilient hard-wearing surface. Clean the surface to be treated of any grease and dirt. Polish/sand uneven surfaces before treatment and remove any resulting dust carefully. Mix the paint properly before use! Test the suitability of the paint on a surface treated earlier. Upon painting metal in outdoor conditions, use Maston H2O as a primer! The paint could be applied using a brush, roller or spray. Dilution and tool cleaning: Water (lukewarm). Required painting and drying temperature over +15°C and relative humidity below 80%. Drying time (+20°C): treatably dry in 1 h. For an optimum end result dry at increased temperatures around +50°C for 30 min. Coverage: 7-8 m2/l. NB! The colour of the label is the approximate paint colour.

    Read more
  • Paint H2O! Grey Primer 250ml

    Paint H2O! Grey Primer 250ml

    Maston H2O! PRIMER - an especially quick-drying water-soluble primer for both indoor and outdoor applications. Well suited for both timber and metal surfaces. For optimum results: observe the following instructions to obtain a resilient hard-wearing surface. Clean the surface to be treated of any grease and dirt. Polish/sand uneven surfaces before treatment and remove any resulting dust carefully. Mix the paint properly before use! Test the suitability of the paint on a surface treated earlier. Upon painting metal in outdoor conditions, use Maston H2O as a primer! The paint could be applied using a brush, roller or spray. Dilution and tool cleaning: Water (lukewarm). Required painting and drying temperature over +15°C and relative humidity below 80%. Drying time (+20°C): treatably dry in 1 h. For an optimum end result dry at increased temperatures around +50°C for 30 min. Coverage: 7-8 m2/l. NB! The colour of the label is the approximate paint colour.

    Read more
  • Paint Primer grey 12ml

    Paint Primer grey 12ml

    With revolutionary Maston Touch-up Spot Repair System you get two solutions in one package. The construction of Maston Touch-up pen is unique. Touch-up pen can be used for all stone chips and small scratches. The construction includes a needle and a small brush as well. The needle is designed for small stone chips and it is easy to adjust the paint volume and circulation. Applicable on metal, wood, glass, stone, ceramics, carton and many hard plastics. Colors of serie The most commonly used RR-tones, white for mouldings, matt and glossy black, as well as primer and lacquer.

    Read more